Guys, I wanted to take the fairings off this weekend to give her a clean and check and lube up, BUT, my Left hand R&G prevented this.
It appears that the bolt for the Bung had mated itself inside what I believe to be an engine-bolt replacement, which the bung bolts into. I got one side off, but the other side won't come out. The fitting is rotating with it which wants to push the fairing out as it comes un-done.
There appears to be 2 "flats" machined into it which you MIGHT just be able to get an open-ended spanner on to, but it's bigger than the biggest I have (other than a 32mm!) which is 19mm.
Anyone know if this would work and what size spanner I would need to get hold of?
Cheers, Jay.