HondaVTRSP.com

Need a rear head and cams.........again!
07768 294676 Adi

Got a head from fleabay so just need rear inlet cam or a pair

Hi Adi, ive left you a voice mail but just to confirm there are some cams on German ebay, more than one set but you will need to ask them if they post to england. Ive just used google translate in the past not difficult at all.

http://www.ebay.de/sch/i.html?_nkw=hond ... 97.c0.m627

vorne = front
hinten = rear
Einlass = inlet
auslass = exhaust

type in zylinderkopf for cylinder head

Cheers Steve, have seen that..........will call them today.

Thanks again Adi

Just out of interest is there a common problem with heads to watch out for as thats the second thread in as many days I have read about people replacing their heads which has got me thiniking / paranoid

Don't panic! Ours is a race bike and we were revving it to 11,800 rpm....seems the rear cams dont like it
Back to a standard ecu from now on. Unless someone wants to donate £1600 for a billet cam kit!

Cheers for the info

its such a shame that Honda didnt use shells or similar bearings for the cams, my mate had some bearings bored into the head on one of his old bikes (dont know what bike) . Anyway i will be keeping my old cams just in case they can be rewoked when times are hard. Same with the heads