I fitted a USB 3 and all was well but since I fitted the Pipes it seems to be fouling the plugs with the STD map in it.
Now the problem I have is when I went on to there web site to check there maps they don't have one with the Ethos cans I have so I changed it to a map with Satos as there the same shape as mine with he air filters and flapper removed.
Gave it a bit of a run on the way home and there is a noticeable change for the better in throttle response but when it cooled down I poped the plugs out for a quick inspection and there a bit on the white side for my liking so I'll have to change it again and try another map.
Have any of you lads had this problem and was it just a matter if going trough the motions or did you bring it to a tuner to have it mapped.
I would bring it to a tuner but Im hoping to get it out on track on the Easter Monday and wont have the time to get it done before hand but don't want to track it with the plugs that white.